Service And Adjustments - Craftsman 919.165372 Manual Del Propietário

Compresor de aire montado en tanque permanentemente lubricado

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

water from air tank may contain oil

and rust which can cause stains.

After the water has been drained,

close the drain valve. The air com-

pressor can now be stored.

ALL MAINTENANCE AND REPAIR OPERATIONS NOT LISTED MUST BE

PERFORMED BY TRAINED SERVICE TECHNICIAN.

voltage sources, compressed air, or moving parts. Before servicing unit

unplug or disconnect electrical supply to the air compressor, bleed tank of

pressure, and allow the air compressor to cool.

To Replace or Clean Check

Valve

Release all air pressure from air

tank. See "To Drain Tank" in the

Maintenance section.

Unplug unit.

Remove the hose by removing

the hose clamp. NOTE: The hose

clamp is not reusable. You must

purchase a new hose clamp, see

the Parts List or purchase a stan-

dard hose clamp at a local hard-

ware store.

Hose Clamp

Check

Valve

Unscrew the check valve (turn

counter-clockwise) using a socket

wrench.

Make sure the valve disc moves

freely inside the check valve and

the spring holds the disc in the

upper, closed position. The check

valve may be cleaned with a sol-

vent, such as paint and varnish

remover.

Risk of Property

Damage. Drain