Commissioning The Device; General Operation - Clatronic CDP 511 Instrucciones De Servicio

Ocultar thumbs

Contenido

página de 28

/ 28
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

4....._05_CDP 511

Battery Mode

1. Open the battery compartment on the rear side.

2. Insert 2 1.5V AA type batteries. Match the polarities correctly (see the inside of

the battery compartment or the marking on the outside).

3. If the device is not used for a long period of time, remove the batteries to avoid

the „spilling" of battery acid.

4. Always change the battery set completely, do not change just one battery.

Warning: batteries are not to be disposed of together with domestic wastes.

Dispose of the used batteries at the relevant collection bin or at your dealer's.

Never throw batteries into the fire.

AC Adapter Mode

You can also use the device with an adapter.

1. Insert the AC adapter into a duly installed 230V/50Hz protective contact outlet.

2. Connect the CD player to the AC adapter by connecting the jack of the adapter

into the 4.5V/DC socket.

3. When using an adapter (4.5V DC/500 mA) match the polarities correctly as

indicated on the CD player.

BASS-BOOST:

VOLUME:

LINE-OUT:

4,5 V-BUCHSE:

PHONES:

CHARGE:

HOLD ON/OFF: key block protecting against the accidental pressing of keys.

Switching off

The machine is switched off by pressing the Stop/Off button once, or twice if one of

the devices is still running. It will also switch off automatically if not operated for

approx. 30 seconds.

Playing CDs

1. Shift the OPEN key to the right to open the CD compartment.

2. Insert a CD with the label facing upwards and press carefully over the button

until it snaps into place. Close the CD compartment.

3. The number of tracks appears on the display.

03.12.2001 10:32 Uhr