Monitoring; Events; Start/Stop; Settings - Ingeteam INGECON SUN 1Play TL M U Serie Manual De Instalacion Y Uso

Ingeteam

11.6.1. Monitoring

This menu includes a series of screens which show the main variables being monitored. To move between the
different screens use the keys
The structure and interpretation of the variables of this menu are shown below:
Pac AC power, in watts
Pwatt Power fed to the public grid in self-consumption mode, in watts.
Ratio Self-consumption ratio. Displays the consumption percentage of the loads being fed by the power
generated by the inverter.

11.6.2. Events

This menu shows the events occurring in the inverter.
Alarms
The alarms indicate current events in the inverter that lead to its shut-down. In section "16.1. Alarms. LED
messages" you can consult the list of alarms and their solution.
Warnings
The warnings are events that do not lead to the shut-down of the inverter but do need maintenance action. In
section "Warnings" you can consult the list of warnings and their solution.
Reasons for shutdown
Log file that indicates the alarms that have triggered the inverter shutdown, indicating the date and time of the
shutdown.
Reset stop reasons
This option resets the Stop reasons log file.

11.6.3. Start/Stop

The operation of the inverter can be stopped and started manually using this option.

11.6.4. Settings

In this menu you can make the following settings:
Date and time
Languages
Modbus ID
Partial deletion
Grounding
Contrast
String settings
Power settings
Test fans
Diesel grid
Factory reset
34
and .
To modify the date and time of the inverter.
Selection of the language for the text on the inverter display.
Assignation of a number that identifies the inverter. In photovoltaic installations with
more than one inverter, each one must be assigned a different number. Ingeteam
recommends using correlative numbering.
Deletes the partial meters.
Not applicable.
To adjust the screen contrast of the inverter.
Not applicable.
Reduce the unit power.
By accessing this option it is possible to run a test to check the inverter fans are working
properly.
Intended for hybrid installations whereby the grid is generated by a diesel generator.
From this menu you can select whether or not the inverted is managed using the
INGECON EMS Manager.
This returns the inverter to factory default status.
ABE2013IQM01_ - Installation and Operation Manual
Display control