Display - Ingeteam INGECON SUN 1Play TL M U Serie Manual De Instalacion Y Uso

Display control

11.2. Display

The main display shows different inverter data:
A. Current date, YYYY-MM-DD.
B. Power reduction percentage and reason for this reduction*.
C. Current time, hh:mm.
D. Voltage and power of the PV array. Both pieces of data are displayed alternately.
E. Power, voltage and current fed to the public grid.
F. Wattmeter for instantaneous self-consumption. This symbol is only shown if the inverter is configured to
work in self-consumption mode. If it flashes, this is due to a communication failure with the wattmeter.
Pressing the key takes you to the main menu. Pressing the key
displays the energy graph for the last 24 days.
* The reasons for power reduction are as follows:
T: Temperature. The inverter is limiting the power due to internal overheating.
C: Communications. The inverter is limiting the power after having received a reduction setpoint through
communications.
F: Grid frequency. The inverter is limiting the power due to the grid frequency variation.
V: Grid voltage. The inverter is limiting the power due to the grid voltage variation.
Q: Reactive priority. The inverter is limiting the power due to the injection of reactive power.
A: Configuration. The inverter is configured to limit its power.
R: Initial connection ramp. The inverter is limiting the power after a reconnection to the grid.
S: Self-consumption mode. The inverter is limiting the power due to functioning in self-consumption
mode.
M: Reserved mode.
ABE2013IQM01_ - Installation and Operation Manual
A B
4/30/2015 4/30/2015
D
C
10:17 AM 10:17 AM
F E
displays the daily power graph. Pressing
Ingeteam
EN
ES
31