Utility Closet Connection Locations - GE AZ91H09D Manual Del Propietário

Installation Overview
RETURN AIR GRILLE INSTALLATION OPTIONS
arrangements will cause performance problems.
There are four indoor return air grille installation options. Choose the option that best suits your installation
NOTE: Use only one filter in the installation.

UTILITY CLOSET CONNECTION LOCATIONS

IMPORTANT:
drains and thermostat carefully to avoid interference. Hard-to-
reach locations will make installation and service difficult!
Small Chassis
Use rigid duct for
hard conduit for
direct connection
6- /
3
8
/
3
8
Plan and locate plenum, electrical connection,
for transitions only
Outside wall
B
A
C
C
Reference Dimensions
A
B
C Unit width and depth: 23-
D /
5
8
E
locations (select one location and plug
the other two):
• Secondary drain water flows into
plenum from the back of the unit.
Primary Drains
• A drain connection is located on the back of the unit
• A drain connection is located on the right and left
the unit.
8
/
3
49-5000448 Rev. 1