Bosch GLM 40 Instrucciones De Funcionamiento página 15

Press button 3 to browse backwards through the saved
measured values.
If no measured value is available in the memory, 0 is shown next
to .
Deleting the Memory
To delete contents of the memory, first press button 4 until the
disk icon appears on the display. Then press the Clear/ On/
Off button 5 to delete the displayed measured value.
Adding/subtracting measured values in real time and length
measurement modes (see figure B)
Press button 4 to exit addition/subtraction.
In Area and Volume Measurement Modes, calculate first area/
volume measurement and then press button 3 or 6. Calculate
the second area/volume measurement and press button 3 or 6
again to get the sum.
To measure, press the measuring button 2.
The measured value will be shown at the bottom
of the display.
Press button 6 to add measured values or press
button 3 to subtract measured values. "+" or "–"
will appear in the middle of the display. Take
another measurement. The current measured
value will be shown at the bottom of the display,
and the previous measured value will be shown
above it.
Press button 6 to add measured values or press
button 3 to subtract measured values. The result
will be shown at the bottom of the display after
"=", and the current measured value will be shown
above it.
-15-