Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Setting the PROGRAM (Future Brew) Time
Coffee Maker can be programmed to begin brewing up to 24 hours in the future.
1. Press the PROG/BOLD button until the word "PROG" appears on the LCD display.
NOTE: By default, 12:00 AM will be displayed, and will be flashing. the "PROG" icon will disappear
within 15 seconds if no buttons are pressed.
2. Press the HOUR button to increase the hour. Once the desired hour is displayed, press the MIN button.
Press and hold HOUR or MIN to toggle quickly.
3. When the future auto PROGRAM time is displayed, press the PROG/BOLD button, "PROG" appears in
the display.
NOTE: Pay attention to the AM and PM setting.
NOTE: Make sure the coffee maker is ready to brew by repeating steps 1-5 of the MAKING COFFEE
IMMEDIATELY section.
4. When the preset time is reached, the ON indicator light will illuminate red and brewing will begin as
indicating above under the MAKING COFFEE IMMEDIATELY steps 6-8. The PROG blue indicator light will
turn off.
IMPORTANT: To cancel the PROGRAM (future brew) start time, press the PROG/BOLD button, the PROG
icon will disappear from the LCD display and the PROG blue indicator light will turn off.
5. To change the preset start time, simply press the PROG button to cancel original setting, the PROG
indicator light will turn off. Then follow steps 1-3 as described above to adjust future brew time.
Setting the BOLD function
The Bold setting adjusts the brewing cycle of a full pot of coffee, allowing more time for the coffee to "steep"
to extract further oils and flavor from the coffee bean. This results in a bolder tasting pot of coffee
1. Press and hold the PROG/BOLD button until the word BOLD appears on the screen.
2. To remove the BOLD function, simply press and hold the PROG/BOLD button until the BOLD
function disappears.
Pause and Serve
Using the pause and serve feature: If you wish to serve a cup of coffee before the brew cycle is completed,
simply remove carafe from the warming plate. Dripping will automatically cease. Return the carafe onto the
warming plate; dripping will resume.
CAUTION: To prevent injury when utilizing pause and serve feature, replace carafe within 30 seconds after
removing during the brewing process.
1. After approximately 2 cups of coffee have been brewed, the carafe may be slowly removed and the
coffee will stop dripping.
2. The flow valve is located on the bottom of the filter holder and is activated when the carafe is removed.
This design makes it possible for you to remove the carafe and pour a cup of coffee before the entire
carafe is brewed.
IMPORTANT: When replacing the filter holder, the flow valve must be properly inserted into the front
hole of the machine, so that it can be seen as it sits on the top of the carafe lid.
3. When using this feature, make sure that the carafe is replaced under the filter holder within 30 seconds
to prevent overflow.
Brewing a Second Pot of Coffee
To brew another pot of coffee, press the ON/OFF button to turn the coffee maker off. Wait 15 minutes to allow
the heating element to cool. Remove and dispose of the used coffee grounds; then rinse the carafe and filter
holder basket with water and repeat the brewing procedure detailed in the "BREWING COFFEE" section.
NOTE: If you do not allow the appliance to cool completely before reuse, water in the water reservoir may
overheat, causing steam to be released. This could result in burns and/or other personal injury.
Hints for Great Tasting Coffee
•
A clean Coffee Maker is essential for making great tasting coffee. Regular cleaning, as described in
the Cleaning & Maintenance Instructions and Descaling sections of this Instruction Manual is
highly recommended.
•
Always use fresh, cold water in your Coffee Maker.
•
Finer grinds, such as drip coffee, promote fuller extraction and provide rich, full-bodied coffee.
Regular grind will require slightly more coffee per cup to provide the strength of a finer grind.
•
Store coffee in a cool, dry place.
•
For optimum coffee flavor, buy whole beans and grind them finely just before brewing.
•
Do not re-use coffee grounds since this will greatly impair coffee flavor.
SO-313406_14552_LINEA_BELLA_12c Prog. CM_WM US_IM_r2.indd 7
7
2016-05-18 2:03 PM
Tabla de contenido
