Safety information
Safe use is only ensured if installation is performed
by a professional in accordance with these
installation instructions. The fitter is liable for any
damage or malfunctions caused as a result of
incorrect installation.
All installation and adjustment work and conversion
to a different type of gas must be performed by an
authorised expert, taking into account the local gas
and electricity providers' current regulations.
Switch off the electricity and gas supply before any
work is carried out.
Before the appliance is installed, check that the local
regulations (type of gas and gas pressure) and the
appliance settings are compatible. The appliance
setting requirements can be found on the
identification plate.
Electrical appliances must always be earthed.
If an extractor hood is to be fitted, this must be carried
out in accordance with the appropriate assembly
instructions. When fitting, allow a minimum clearance
of 650 mm to the hob, or to the height recommended
by the extractor manufacturer, whichever is the
greater.
25