Lorex LW2231 Manual De Instrucciones página 8

Installation (Continued)
Ventilation
10. - Slots and openings in the case are
provided for ventilation to ensure reliable operation
of the product and to protect it from overheating.
These openings must not be blocked or covered. The
openings should never be blocked by placing the video
equipment on a bed, sofa, rug, or other similar
surface. This product should never be placed near or
over a radiator or heat register. This product should
not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided
and the product manufacturer's instructions have
been followed.
Attachments
11. - Do not use attachments unless
recommended by the product manufacturer as they
may cause a hazard.
Water and Moisture
12.
monitors near water — for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet
basement, near a swimming pool and the like.
Heat
13. - The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that
produce heat.
Accessories
14. - Do not place this
video equipment on an unstable
cart, stand, tripod, or table. The
video equipment may
causing serious damage to the
product. Use this product only
with a cart, stand, tripod,
bracket, or table recommended
by the manufacturer or sold with
the product. Any mounting of the product should
follow the manufacturer's instructions and use a
mounting accessory
manufacturer.
Camera Extension Cables
15.
your extension cable(s) to verify compliance with your
local authority regulations prior to installation.
Mounting
16. - The cameras provided with this system
should be mounted only as instructed in this guide or
the instructions that came with your cameras, using
the provided mounting brackets.
Camera Installation
17.
for submersion in water. Not all cameras can be
installed outdoors.
environmental rating to confirm if they can be
installed outdoors.
outdoors, installation in a sheltered area is required.
vi
- Do not use receivers or video
fall,
recommended by
– Check the rating of
- Cameras are not intended
Check your camera
When installing cameras
Service
Servicing
1.
equipment yourself, as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
Conditions Requiring Service
2.
product from the wall outlet and refer servicing to
qualified service personnel under the following
conditions:
A. When the power supply cord or plug is damaged.
B. If liquid has been spilled or objects have fallen into
the product.
C. If the product has been exposed to rain or water.
D. If the product has been dropped or the cabinet has
been damaged.
E. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions. Improper adjustment of other controls
may result in damage and will often require extensive
work by a qualified technician to restore the product
to its normal operation.
F. When the product exhibits a distinct change in
performance. This indicates a need for service.
Replacement Parts
7.
required, have the service technician verify that the
replacements
characteristics as the original parts. Use of
replacements specified by the product manufacturer
can prevent fire, electric shock, or other hazards.
Safety Check
8.
the
repairs to this product, ask the service technician to
perform safety checks recommended by the
manufacturer to determine that the product is in safe
operating condition.
Use
Cleaning
1. - Unplug the product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
Product and Cart Combination
2.
combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the
product and cart combination to overturn.
Object and Liquid Entry
3.
kind into this product through openings as they may
touch dangerous voltage points or "short-out" parts
that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
Lightning
4.
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due
to lightning and power line surges.
- Do not attempt to service this video
- When replacement parts are
used have the
- Upon completion of any service or
- Product and cart
- Never push objects of any
- For added protection of this product
- Unplug this
same safety