TECHNICAL SPECIFICATIONS
MODEL
Series (type code)
INPUT
Maximum current
Voltage Regulator
OUTPUT
Nominal power VA
Nominal power W
PROTECTION AND
Protection against
FILTERS
overload and short
BATTERY
Typical recharge time
Weight with packaging
PHYSICAL
Size (mm) WxDxH
CHARACTERISTICS
ALARMS
Overload <110%
Overload >110%
Disabling buzzer
INTERFACE
ENVIRONMENTAL
CONDITIONS (1)
OTHERS
(1) to prolong battery life, keep it connected to the mains so as to preserve the battery charge and at an
operating/storage temperature of 20-25°C.
Win Dialog 50
USY1...
Capacity
Frequency
Voltage
(on battery)
Frequency
(on battery)
AVR automatically increases the output voltage by 17% if the input voltage drops by
-10% to -26% below nominal. AVR decreases the output voltage by 15% if the input
AVR
Transfer time
EMI/RFI Filter
Battery: the UPS shuts down after 30 seconds if the load is between 100 ~ 110% of
the nominal, after 5 seconds if it exceeds 110%, or immediately in the event of a
circuits
Type
Model
12V 7Ah
Protections
Net Weight (Kg)
(Kg)
Input plug
Output plugs
Battery Mode
Battery failure
USB Interface
Environmental
Conditions
Noise level
Win Dialog 40U
Plus USY2...
230V +20%/ -25%
50 or 60Hz +/-5% (auto sensing)
3 A
2.4 A
Step wave 230Vac +/-5%
50 or 60Hz +/-0.5% (auto sensing )
voltage increases by +9% to +20% above nominal.
Typically 6-8 ms
500
400
300
240
10dB at15MHz, 50dB at 30MHz
Mains: Fuse for overload and short circuits
short circuit.
Lead acid, sealed, maintenance-free
12V 4.5Ah
Protection against battery failure, battery replacement indicator
5.3
4.2
-
-
152x110x325 mm
IEC 320-10A
N°3 x IEC 320-10A
Slow audio signal (approx. 0.20Hz)
Fast audio signal (approx. 1Hz)
Fast audio signal (approx. 1Hz)
Continuous beep
-
via software
-
max. altitude 6,000 metres, 0-90% non condensing humidity
<40dBA (1m from source )
27
Win Dialog 60U
Plus USY2...
3.6 A
600
360
12V 7Ah
6-8 hours
5.5
-
via software
Bi-directional communication port
0-40°C
Win Dialog 80U
Plus USY2...
4.8 A
800
480
12V 9Ah
6.1
-
via software