urmet domus 1092 Manual De Usuario página 28

This function allows to detect movements in the minicamera captured images. At any sudden movement
(for example, a door opening), the operator will be informed with a blinking icon on monitor right side.
Select this menu item and press the button OPEN to gain access to the following submenu:
MOTIO DET SETUP
AREA SEL
SENSITIVITY
RETURN
AREA SEL – SELECTING MOVEMENT SENSITIVE AREA
Select this option to access to the selection screen. In this special screen the captured scene is divided into
zones that can be activated by the user.
In this way it is possible to select as sensitive to movement some special shooting points, while others can
be excluded.
For example, if in the scene there are a door and a window, the alarm can be activated on a door
movement and not on the window movement.
Use the left and right button to move on the zone to be activated (for example, the door) and confirm by
pressing the central button.
To remove the selection of the point, put again the button in the central position.
SENSIVITY
Use the button on the minicamera by moving it to the right or left to increase or reduce the motion detector
sensitivity. The value 1 indicates the max. sensitivity, the value 100 the min. sensitivity.
The PRIVACY function allows to specify up to 8 privacy zones that mask specific areas, which become
invisible to the operator. A privacy zone is displayed on the screen with a rectangle, which colour and
transparence level have been previously selected by the user.
NOTES ABOUT PRIVACY ZONE
It is recommended to select privacy zones slightly larger than the area to be masked.
Privacy zones can only be rectangular.
Select PRIVACY ON and press the button to gain access to the following submenu:
PRIVACY SETUP
AREA SEL
AREA COLOR
AREA TRANS
RETURN
28
MOTION DET – MOTION DETECTOR
■■■■■■■█■■■ 50
PRIVACY – MASKING ONE OR MORE PARTS OF A SCENE
YELLOW
■■■■■■■█■■■ 50
DS1092-074