urmet domus 1092 Manual De Usuario página 20

FOCUSING PROCEDURE FOR AUTO-IRIS LENSES
1. Fit the optics on the camera.
2. Connect the wire to the Auto-Iris connector.
3. Adjust the zoom
4. Adjust the focus
5. If it is not possibile to get a perfect focus, operate on the Easy Back Focus adjustment; when finished,
fix it in order to avoid to loose it.
USING COMMANDS AND PRESETTINGS
Button menù
12Vcc – 24Vac power supply
The camera 1092/162 can be installed using a support bracket.

Fasten the fixing support to the camera with the three screws.

This support can be installed on both camera sides.

Fix the base on the lower side for wall mounting or on the upper side for ceiling mounting.
20
AUTO-IRIS connector
Power-on led
Easy Back Focus
adjustment
Video output
DS1092-074