Promax SATHUNTER+ Manual De Instrucciones página 39

USER'S MANUAL. SATHUNTER+.
DVB-S / DSS MEASURES
VBER
DVB-S2 MEASURES
LBER
Spectral inversion
Quality level for acceptance
Initial values
Displayed information
(only for DVB-S/S2; for DSS the
information of the transport stream is
not available)
Configuration
of test points
EXTERNAL UNITS POWER
SUPPLY
Output voltage
Maximum output current
22 kHz signal
Voltage
Frequency
BACK-LIGHT DISPLAY
POWER SUPPLY
Battery
Low battery indication
Charger
Autonomy
Charging time
Temperature of start charging
10/2010
1E-8 to 1E-3.
1E-8 to 1E-3.
Definable by user.
Definable by user.
MER = 5 dB.
Satellite's Azimuth and orbital position if it is
detected.
Service name, (the 48 first services) and
network, if it is detected. Visual indication of
DSS, DVB-S or DVB-S2 synchronized signal.
By USB 2.0 connection to PC. (Cable and
program included).
Through the RF input connector.
13 V, 18 V. ± 1 V.
300 mA.
Selectable.
0.6 V ± 0.2 V.
22 kHz ± 4 kHz.
Automatic.
7.4 V 2.2 Ah Li-Ion battery.
Acoustic indication and a message on the
display.
Built-in. It disconnects the powering when the
charging process ends.
80 min. typically, powering a universal LNB and
identifying a signal continuously.
100 min. approx. starting from a complete
discharge (instrument off), within the margin of
tolerated temperatures.
Between 5 and 45 °C.
Outside this range of temperatures, the charger
will not initiate the charging process. At high
ambient temperatures, the charging process will
not be carried out in continuous mode because
the charger circuit has a heat-protection device
that disconnects this circuit when it is over
45 °C, returning to connect itself when it is
above 40 °C.
Page 3