Antenna Adjustment For Optimum Reception - Promax SATHUNTER+ Manual De Instrucciones

SELECT MEASURE
SOUND CONTROL
BACKLIGHT MODE
CONTRAST LCD
CONFIRM & EXIT

4.3 Antenna Adjustment for Optimum Reception

The SATHUNTER+ has been designed to adjust the orientation of a satellite
antenna in order to achieve the optimum reception of a digital satellite signal from a
previously memorised one.
The adjustment process consists of three steps:
1 Satellite detection and location: 1> DETECT
2 Identification of a located satellite: 2> IDENTIFY
3 Precise antenna adjustment for optimum signal quality. 3> ADJUST
Page 16
Pressing the key (2) LEVEL it moves the vertical axis of
representation. It moves from 40-70 to 70-100 dB.
Pressing the key (3) LNB it changes the LNB power (13 V,
13 V +22 kHz, 18 V, 18 V + 22 kHz).
It allows you to select what measurement you want
displayed on a bar at the screen ADJUST. You can choose
between MER and LM (Link Margin).
There are three different options: ON, OFF and BEEP. The
option ON emits a sound that varies in tone depending on
the input power and also sounds a beep when pressing a
key. The option OFF does not emit any sound. The option
BEEP, emits a beep every time you press a key but does
not sound the power detector.
Actives (ON) or disables (OFF) the back-light of the screen.
The AUTO option actives the back-light when the user is
pressing keys. After one minute without using the
instrument, the back-light turns off.
Allow you to chose between four contrast levels.
After making changes in the setup menu, you should use
this option to confirm and apply the values and exit the
setup menu.
USER'S MANUAL. SATHUNTER+.
10/2010