Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION
General functions
Switching on and off
1
Press »ON/OFF« to switch the device on and
off.
Adjusting the volume
1
Adjust the volume using
Adjusting the tone
1
Adjust the tone using »
DAB mode
For the best DAB reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
Selecting the input source DAB
1
Select the input source DAB with
AL«.
– Display: »DAB«, then the name of a DAB ra-
dio station.
Selecting stored stations
1
Select the station you want using the preset but-
6« to
10« (presets 1 to 5) or using
tons
»1
»5
/
/
5« and the preset buttons
»+
(presets 6 to 10);
or
select the desired station step by step by press-
ing »TUNING«.
Displaying DAB station information
1
To display information on the current DAB sta-
tion, press »INFO« repeatedly.
– The following display appears in succession:
Information from the provider (e.g. the title
of the song, the e-mail address), the signal
strength, the genre, the Ensemble (e.g. BR for
Bayern), the current frequency, reference to
signal interference (at optimum signal display
»ERR: 0«) the bit rate, the broadcasting format,
the current time and date.
------------------------------------------------------------------------------------------------------------------------------
»– VOLUME
+«.
!
"
«.
»MODE/
6« to
10«
»1
»5
/
/
Setting Dynamic Range Control
(DRC) for DAB stations
When you activate Dynamic Range Control, you
can hear lower sounds better in a loud environ-
ment.
1
Open the menu with »MENU«.
2
Select the option »DRC« with »TUNING« and
confirm by pressing »SEL/ATS«.
– Display: »DRC OFF«.
3
Select the option "DRC LOW" or "DRC HIGH"
with »TUNING« and confirm by pressing
»SEL/ATS«.
4
Press »MENU« to end the display.
Note:
The DAB station must support DRC.
7
FM mode
For the best FM reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
Selecting the input source FM
1
Select the input source FM with »MODE/AL«.
– Display: »FM«, then the frequency of a FM
radio station.
Selecting stored stations
1
Select the station you want using the preset but-
tons
»1
6« to
»5
10« (presets 1 to 5) or using
/
/
»+
5« and the preset buttons
(presets 6 to 10).
Displaying RDS station informations
RDS (Radio Data System) is an information sys-
tem which is transmitted additionally by most FM
stations.
Notes:
It may take some time before all RDS infor-
7
mation is available.
GRUNDIG has no influence on the correct-
7
ness of such information.
1
Press »INFO« repeatedly.
– The following display appears in succesion:
The name of the radio station, radio text (if
offered), station type (PTY), the current time
and date.
»1
6« to
»5
10«
/
/
ENGLISH
23
Tabla de contenido
