Instructions For Assembly; List Of Spare Par Ts; Waste Disposal - Kettler RACE 07938-100 Manual Del Usuario

as well as respective safety devices fit correctly.
The brake linings should also be checked at regular intervals
I
and adjusted as necessary.
Always wear suitable shoes when using.
I

Instructions for Assembly

Ensure that you have received all the parts required (see check
I
list) and that they are undamaged. Should you have any
cause for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully
I
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
The equipment must be assembled with due care by an adult
I
person. If in doubt call upon the help of a second person, if
possible technically talented.
Please note that there is always a danger of injury when working
I
with tools or doing manual work. Therefore please be careful
when assembling this machine.
Ensure that your working area is free of possible sources of
I
danger, for example don't leave any tools lying around.
Always dispose packaging material in such a way that it may
not cause any danger. There is always a risk of suffocation if
children play with plastic bags!
List of spare par ts page 25-26-27
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the
product (see handling).
Example order: Art.no.07938-100 / spare-part no. 33100003 /
2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the ori-
ginal box if possible.
It is important to provide a detailed defect description / damage
report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material".
All electric appliances emit electromagnetic radiation when in
I
operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed
might be distorted (e.g. pulse measurement).
The fastening material required for each assembly step is
I
shown in the diagram inset. Use the fastening material exactly
as instructed. The required tools are supplied with the equipment.
Bolt all the parts together loosely at first, and check that they
I
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all screw
connections have been tightened firmly. Attention: once locknuts
have been unscrewed they no longer function correctly (the
locking device is destroyed), and must be replaced.
To pull off the pedal arms remove cap and screw (A). Grip the
I
pedal arm tightly, and screw in an M12 bolt (not supplied)
into the thread (B). After a few turns you may take off the pedal
arm (C).
For technical reasons, we reserve the right to carry out pre-
I
liminary assembly work (e.g. addition of tubing plugs).

Waste Disposal

KETTLER products are recyclable. At the end of its useful life please
dispose of this article correctly and safely (local refuse sites) .
KETTLER (GB) Ltd.
Merse Road · North Moons Moat · Redditch, Worcestershire
B98 9HL · Great Britain
http://www.kettler.co.uk
KETTLER International Inc.
1355 London Bridge Road · Virginia Beach · Virginia VA
23453 USA
http://www.kettlerusa.com
english
5