Unpacking Instructions - Fanimation SLINGER v2 LP8147SLMWBN Manual Del Usuario

This manual is designed to make it as easy as possible for you to assemble,
install, operate and maintain your ceiling fan
Tools Needed for Assembly
(Not Included)
ne hillips head screwdriver
One stepladder
!
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 10). If you
feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check
mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should
you be interrupted.
Do not install or use fan if any part is damaged or missing. This product is designed to use only those parts
supplied with this product and/or any accessories designated specifically for use with this product by Fanimation.
Substitution of parts or accessories not designated for use with this product by Fanimation could result in
personal injury or property damage.
1. Check to see that you have received the following parts:
NOTE: If you are uncertain of part description, refer to exploded view illustration.
Hanger Bracket
Assembly (1)
Downrod/Hanger Ball
Assembly (1)
– Downrod (1)
– Hanger Ball (1)
– Set Screw (1)
– Hairpin Clip (1)
– Clevis Pin (1)
– Pin (1)
Canopy Screw
Cover Assembly (1)
Hardware Bags
Wire Connectors (4)
One wire stripper
One lade
screwdriver
WARNING

Unpacking Instructions

Motor Coupling
Cover Assembly (1)
Ceiling Canopy (1)
Motor Assembly (1)
1/4˝ -20 Pan Head Screws
with Lock Washer (28)
iring outlet o and o connectors
re uired y the local code
conductor
nstalled ire ength
p to
NOTE: Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are
missing contact your local retailer.
Light Plate Assembly (1)
Light Kit Assembly (1)
Blade Set (1)
4
Materials
ust e of type
he ini u
wire with ground of the following si e:
ire i e
ft
ft
LED Assembly (1) Blade Cover Set (1)
Steel Cap (1) Blade Holder Set (1)
Receiver (1) Hand-Held Remote (1)
Wire Connectors (9) Wall Plate (1)
Screws (2)
Batteries (2)
3/16˝ -24
Serrated Head Screws (28)
wire would e a