Sony PFM-42V1 Manual De Instrucciones página 84

Watching the Picture
Preset input signals
Signal name
Computer signals
a)
1 VGA -1 (VGA 350)
b)
2 640×480@60 Hz (VESA STD)
3 Mac c) 13"
4 VGA (VGA TEXT)
5 800×600@60 Hz (VESA STD)
6 Mac 16"
7 1024×768@60 Hz (VESA STD)
8 1024×768@75 Hz (VESA STD)
9 1024×768@85 Hz (VESA STD)
10 1152×864@75 Hz (VESA STD)
11 Mac 21"
12 1280×960@60 Hz (VESA STD)
13 1280×1024@60 Hz (VESA STD)
14 1600×1200@60 Hz (VESA STD)*
15 848×480@60 Hz (VESA STD)
16 848×480@60 Hz (VESA STD)
17 848×480@75 Hz
18 1280×768@60 Hz
19 1280×768@60 Hz
SDTV/HDTV
1 PAL
2 NTSC
3 SECAM
4 NTSC4.43
5 PAL60
6 PAL-M
7 PAL-N
8 575/50i
9 480/60i
10 1080/24psf
11 1080/50i
12 576/50p
13 480/60p
14 1080/60i
15 720/60p
28
(GB)
Color system or horizontal/
vertical frequency
31.5 kHz 70 Hz
31.5 kHz 60 Hz
35.0 kHz 67 Hz
31.5 kHz 70 Hz
37.9 kHz 60 Hz
49.7 kHz 75 Hz
48.4 kHz 60 Hz
60.0 kHz 75 Hz
68.7 kHz 85 Hz
67.5 kHz 75 Hz
68.7 kHz 75 Hz
60.0 kHz 60 Hz
64.0 kHz 60 Hz
75.0 kHz 60 Hz
29.8 kHz 60 Hz
29.5 kHz 60 Hz
37.7 kHz 75 Hz
47.8 kHz 60 Hz
47.4 kHz 60 Hz
PAL
NTSC
SECAM
NTSC4.43
PAL60
PAL-M
PAL-N
575/50I
480/60I
1080/48I
1080/50I
576/50P
480/60P
1080/60I
720/60P
a) VGA is a registered trademark of International Business
Machines Corporation, U.S.A.
b) VESA is a registered trademark of the Video Electronics
Standards Association.
c) Mac (Macintosh) is a registered trademark of Apple
Computer, Inc.
Notes
• When inputting an HDTV signal, input the tri-level
sync signal to the 2nd pin of RGB/YUV (D-sub 15
pin) on the INPUT1 connector.
• If colors appear too light after inputting a DVD
signal to PFM-42V1 series, adjust the "Chroma"
setting in the Adjust Picture menu.
• When the phase is readjusted, the resolution will be
reduced.
• You cannot input the signal indicated with * to DVI
IN.
Actual on-screen display of the unit's status
On-screen display Significance
640×480 / 60 (e.g.) The selected input signal is
computer RGB.
480 / 60P (e.g.) The selected input signal is
component video.
NTSC (e.g.) The selected input signal is NTSC.
Out of Range The input signal is out of the
capture range.
No Sync There is no input signal.
INPUT1 RGB The signal mode of INPUT1 is set to
RGB.
INPUT1 YUV The signal mode of INPUT1 is set to
component video.
VIDEO COMPOSITE Composite video input is selected
for VIDEO.
VIDEO Y/C Y/C video input is selected for
VIDEO.