Lenco LBT-188 Manual De Usuario página 19

Maintenance and Cleaning
Your turntable requires little of no regular maintenance. Remove dust with a
slightly damp antistatic cloth. Never use a dry cloth, this will create static
electricity and attract more dust! Antistatic cleaning agents are available at
specialist stores, but must be applied sparingly to avoid damage to rubber
parts. It is recommended to install the needle cover before cleaning or
maintenance is carried out to avoid damage.
If the turntable is not used over a long period of time, the drive belt should
be removed to prevent unequal stretching.
NOTE: Always disconnect the record player from the power supply as a
precaution before maintenance!
Useful Tips
The turntable should be positioned on a low-resonance surface such as
wood or multiple layer ply board to avoid structural vibrations disturbing
playback.
Cartridge Replacement
1. Before replacement, put the stylus protector back on the stylus to
prevent damage to the stylus during the replacement process.
2. Carefully remove the wire leads from the original cartridge.
3. Loosen the two screws on the headshell that are securing the
cartridge and then remove the original cartridge.
4. Mount the new cartridge to the headshell and tighten it lightly. Do not
completely tighten the screws at this moment.
Connect the wire leads to the new cartridge's terminals. The wire lead
5.
color codes are as below:
White Left channel positive (L+)
Black Left channel negative (L–)
18