Garland APACHE 675 SL Manual Do Operador página 47

Remember to always use the machine with clean
hands and without any fuel or oil remains.
Clean the work area and remove all obstacles that
may cause accidents. Check the work area when
going to work and remove all items that could
become entangled in the cutting tool. Also remove
all the objects that the cutting tool can violently eject
while in operation.
Do not allow anyone to enter the work perimeter.
This work perimeter must be 15 meters and is a
danger zone.
You must turn off the engine when you are moving
between work areas.
Never leave this machine unattended.
Be careful not to touch the hot parts of the
machine while the engine is running or after
use, such as exhaust, spark plug or high
voltage cables.
Do not use other accessories this machine except
those recommended by our company since its use
could cause severe damage to the user, people close
to the machine and the machine itself.
Always follow the safety rules given in this manual.
7.1. HOLDING AND GUIDING THE MACHINE
While working, always hold the
lawnmower with both hands on the
handlebar.
Stand behind the mower and direct it while walking
behind it.
This lawnmower is self-propelled. Do not push the
mower; allow it to continue at its speed and limit
yourself to directing the machine in the work area.
Choose the most convenient setting according to the
type of work.
7.2. ADJUSTING THE CUTTING HEIGHT
WARNING! Stop the machine and wait until the
blade stops before proceeding to adjust the height.
Blades need a few moments to stop completely after
you turn off the engine.
To regulate the cutting height adjustment, press the
mower level away from the lawnmower and move it
forward or backward to the desired height.
7.3. CUTTING WITH THE LAWNMOWER
This mower has 2 different cut settings (cutting with
debris collection and rear discharge cut. Before you
begin working, you must configure the mower to set
it one of the three possible ways.
Cut with collection:
In this configuration the mower will cut the grass and
send it to the collection bag. The grass will be cut
and the rest of the grass cut inside the bag.
For harvest cutting, place the bag at the back of the
machine and make sure the mulching plug is not
in place.
47/184
English