Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Cleaning metal grease filters
The filters must be cleaned every 2 months
of operation, or more frequently for particu-
larly heavy usage, and can be washed in a
dishwasher.
• Remove the Filters one at a time, pushing
them towards the back of the unit and at the
same time pulling downward.
• Wash the Filters without bending them, and
leave them to dry completely before replac-
ing. (If the surface of the filter changes colour
as time goes by, this will have absolutely no
effect on the efficiency of the filter itself.)
• Replace, taking care to ensure that the
handle faces forwards.
• No water can be present in filters before
installing back in hood.
Replacing Activated Charcoal Filter
The filter is not washable and cannot be regener-
ated, and must be replaced approximately every 4
months of operation, or more frequently for particu-
larly heavy usage.
• Remove the Filters one at a time, pushing them
towards the back of the unit and at the same time
pulling downward.
• Remove the saturated charcoal filter by releasing
the fixing hooks.
• Fit the new filter and fasten it in its correct position.
• Replace, taking care to ensure that the handle
faces forwards. "When used in recirculation
mode, to Reduce the Risk of Fire and Shock
use only conversion kit Model FILTER 2".
Lighting Unit
• LED lights must be replaced by Faber factory authorized
service.
18
Tabla de contenido
