Hema 80.06.0006 Instrucciones De Uso página 16

PARTS DESCRIPTION
1. Handle
2. Speed switch
3. Fan guard
4. Fan blade
5. Fan body
6. Power cord and plug
OPERATING INSTRUCTIONS
1. Plug the power cord into a suitable socket.
2. Flip the speed switch to turn on the fan ("I" = low speed, "II" = high speed).
3. To turn the fan off, flip the switch to the "0" position.
CLEANING
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and dry it carefully. Always take out the mains plug first.
3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
RECYCLING
This product bears the selective sorting symbol for waste electrical and electronic equipment
(WEEE).
This means that this product must be handled pursuant to European Directive 2012/19/EU in
order to be recycled or dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment
and human heath due to the presence of hazardous substances.
QUALITY
Safety and quality is very important to HEMA. We have our own laboratory, which assesses all equipment in
terms of electrical safety and ease of use, before it is included in our range. HEMA also monitors the product
quality in collaboration with the manufacturer.
SECURITY
This HEMA item may be fitted with a plastic anti-theft strip. You will find the strip on the bottom of the product.
This strip does not influence the quality or the operation of the product and can be removed without a problem.
FAULTS AND REPAIRS
If this device needs to be repaired, you can hand it in at a HEMA branch after packing the product securely. Do
not try to repair this product yourself. For repairs that fall within the warranty period, you will need to show a
proof of purchase and the warranty document. Regularly check the power cord for damage. If there is any
damage to the cord set, please return the item to a HEMA branch for repair. Do not try to replace it yourself.
For safety reasons we recommend that you do not carry out any repairs to an electrical device yourself.
- 15 - 80.06.0006 / 80.06.0023 / 80.06.0024 / 80.06.0025