Care And Cleaning - Glacier bay F1AA0006BNV Guía De Instalación Y Cuidado

Care and Cleaning

To clean, wipe down with a damp cloth and towel dry.
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
Troubleshooting
Hot and cold are reversed.
There is no or a low water
ow.
There is leaking or dripping
from the spout.
There is only hot water or only
cold water from the spout.
The temperature range is
restricted.
Unable to install the handle or
the handle rubs against the
escutcheon.
The handle is hard to turn.
Lines reversed or cartridge
installed upside down.
One or both water supplies are
not turned on.
Grommets not sealing properly.
Balancing spool stuck.
The handle (more common in
knob models) is installed upside
down.
Temperature limit stop is out of
position.
The valve is installed too far
back from the nished wall.
The cartridge stem is dif cult
to rotate.
12
Rotate the cartridge stem 180°
so that the notch is facing down
towards the drain.
Turn both water supply valves
counterclockwise to the on posi-
tion.
Replace the cartridge.
Replace the cartridge.
Remove the handle, rotate it
180°and re-install.
Reposition the temperature limit
stop to the desired temperature
position.
Order extension kit (206416676
or 206416670) on Homedepot.
com.
Replace or lubricate the cartridge.