SEVERIN KS 9799 Instrucciones De Uso página 14

Familiarisation
Diagram similar!
1. Temperature control
2. Mains connection indicator (green)
3. High-temperature alarm (red)
4. Rapid-freeze drawer
5. Freeze drawers
6. Condenser
7. Compressor
Before using for the fi rst time
∙ Remove any exterior and interior packaging materials
completely, including the transport securing devices.
∙ The packaging materials must be properly disposed of.
∙ NOTE: When the door to the freezer unit is opened, a small
red component will fall out; this is for transport only and can
be disposed of.
∙ Fit the two spacer elements (1, provided) into the
corresponding guide slots (2) on the rear.
14
∙ Before it is connected to the mains, the unit must be
thoroughly checked for transport damage, including its
power cord.
∙ Clean the unit as described in the section De-frosting and
cleaning.
∙ When the unit is fi rst switched on, a slight 'new' smell may
be noticed. However, this will disappear once the cooling
process has begun.
Installation
∙ The appliance should be set up in a well-ventilated, dry
room.
∙ It should be operated in conditions where the relative
humidity is no more than 70 %.
∙ Refrigeration appliances are classifi ed into certain
climate classes. This classifi cation indicates the ambient
temperature at which the device can be operated. Please