Bestron AVC225W Manual Del Usuario página 19

instruction manual
operAtion - general
The appliance is intended only
for domestic use, not for
professional use.
1. Charging holder
2. Mains adapter
3. Connection plug
4. Motor housing
5. Connection contacts for handheld vacuum
cleaner
6. Handle
7. On/Off switch
Before use for the first time
Remove the appliance and all accessories from the packaging
operAtion - fitting the connection plug to the charging holder
1. Insert the adapter's (2) charging plug (3) through the opening in the base of the charging holder (1).
Turn the connection plug clockwise through 90 degrees.
operAtion - Mounting the charging holder to a wall (optional)
You can put the charging holder on a worktop;
you can also mount it on a wall. This will enable
you stow the hand-held vacuum cleaner neatly in
a permanent storage place.
Figure 2 Mounting the charging holder to a wall
operAtion - charging the batteries
1. Fit the hand-held vacuum cleaner to the charging holder.
The hand-held vacuum cleaner could fall off the charging holder or the charging system could fail if
it is not positioned correctly.
2. Put the adapter into the wall socket. The charging light (8) of the vacuum cleaner will now illuminate.
3. Allow the hand-held vacuum cleaner to charge for at least 16 hours. The adapter may become slightly
warm whilst it is charging. This is normal, and does not indicate that the appliance is defective.
4. Remove the adapter from the mains socket.
5. The appliance is now ready for use.
operAtion - dry vacuum cleaning
Use the hand-held vacuum cleaner only when the filter (10)is correctly fitted (see 'Cleaning the
filter'). A damaged or incorrectly-fitted filter can cause damage to the appliance.
9
7
8
6
4
5
19
10
11
1
8. Charging light
9. Dust/liquid-receptacle release button
10. Removable filter
11. Dust/liquid receptacle
12. Crevice tool, for crevices and corners
13. Nozzle with brush
14. Nozzle with Rubber attachement
14
12
13
3
Figure 1 features
2