Costan BOUTIQUE Serie Instrucciones De Uso página 39

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
• Never leave upper glass sliders open or ajar (fig. 13). It is advisable to often check that all sliders
are closed: you will thus avoid unnecessary energy consumption and frost build-ups on the walls
and you will also allow better foods preservation.
DESCRIPTION OF CONTROLS
The BOUTIQUE display cases have a control panel in the base. This control panel lodges a remote
thermometer/remote thermostat for temperature display and control through appropriate keys.
Temperature regulation is restricted to the after-sales personnel.
Do not remove the panel protecting of the electric control board for no reason whatsoever.
DEFROSTING
The number and duration of defrosts are factory-set.
The user must never alter their adjustment.
The cases are supplied as including a U-trap for their connection to the sewer system (WHICH
MUST BE CARRIED OUT BY THE AFTER-SALES SERVICE IN CHARGE OF INSTALLATION).
9. PRESCRIPTIONS AND RESTRICTIONS
KEEPING PHARMACEUTICAL PRODUCTS, GLASS BOTTLES OR FLASKS IN THE SHOWCASE IS
STRICTLY FORBIDDEN as they could get broken and entail a safety hazard (fig. 12).
DO NOT REMOVE COVERS OR PANELS WHEN IT REQUIRES THE USE OF TOOLS AND ESPECIALLY
DO NOT REMOVE THE ELECTRIC CONTROL BOARD COVER.
Caution: never remove the glass sliders. The cabinet was designed to only work with the
sliders on.
Do not expose the display case to atmospheric agents (fig. 18). DO NOT STEP on the cabinet bum-
per rail. DO NOT STEP on the top of the cabinet and DO NOT LAY WEIGHTS on it.
Do not spill water directly or indirectly on the display case (fig. 13).
Do not touch the machine with damp or wet hands or feet; do not use it while barefoot (fig. 19).
Do not step on the bumper rail.
ANY OTHER USE NOT EXPLICITLY MENTIONED IN THIS BOOKLET MUST BE CONSIDERED
AS HAZARDOUS. THE MANUFACTURER DISCLAIMS ALL LIABILITY FOR ANY DAMAGE RE-
SULTING FROM IMPROPER, INCORRECT OR UNREASONABLE USE.
10. ORDINARY MAINTENANCE
ATTENTION! BEFORE MAINTENANCE OR CLEANING, DISCONNECT THE REFRIGERATOR FROM THE
ELECTRICAL POWER SUPPLY USING THE WALL MAIN CUTOFF SWITCH (fig. 20).
IMPORTANT: During maintenance or cleaning operations, be sure that the light in the working area
is sufficient. If necessary, use an additional source of light. Mind also the hot and moving parts
marked with the relevant symbol. The use of heavy-duty gloves is recommended.
CLEANING THE CABINET
1) Every week clean the outer surfaces of the display case with mild soap or detergent in lukewarm
water only. Wipe carefully with a soft cloth. Never clean it using inflammable or scouring agents
alcohol, acetone or solvents.
NEVER CLEAN THE DISPLAY CASE BY THE USE OF WATER JETS (fig. 13). Clean glass surfaces using
BOUTIQUE
Epta Spa - Unità locale: Via degli Alpini 14 - 32020 Limana
(BL) ITALIA Tel. 0437/9681 Telefax 0437/967434
STATE REVISION
-
ORD. DATE 20.04.2020
PAGE:
N° DOC.
39/59
UM000459