Troubleshooting Procedures (cont.)
Symptoms
Troubleshooting the Effervescence Jets
Symptoms
20. Effervescence ports do not
work.
21. Effervescence ports do not
bubble.
Troubleshooting the Chromatherapy Lights
Symptoms
22. Chromatherapy lights do
not work.
1022365-2-C
Probable Causes
C. Switch wire from switch to
control is disconnected.
Probable Causes
A. Whirlpool pump is not
operating.
B. Butterfly valve does not work.
C. Pump does not work.
D. Control does not work.
A. Air intake on suction line is
blocked.
B. Water flow is too low.
Probable Causes
A. Loose, disconnected or damaged
wiring/connections.
B. Control does not work.
Recommended Action
C. Reconnect or replace switch wires
that use modular plug.
Recommended Action
A. Turn on pump.
B. Replace butterfly valve.
C. Refer to the service manual to
troubleshoot the system. Refer to
installer/dealer.
D. Replace control.
A. Remove blockage.
B. Increase water flow.
Recommended Action
A. Check wiring for proper
connections. Replace wiring if
necessary.
B. Replace control.
18
Kohler Co.