ESYLUX PD-C360i/24 DIMplus WH Manual De Instrucciones página 16

long as movement is detected, regardless of the ambient lighting level.
The HVAC channel is switched on when movement is detected, regardless
of the ambient light value. The time settings for the respective channels
will start if movement is no longer detected. Light channel C1 cannot be
switched off by button. The HVAC channel can be manually switched off
GB
using the S2 button.
orientation light
The orientation light value is 10 % of the full luminous efficiency.
The Mobil-PDi/plus remote control can be used to switch this function
either on or off.
Afterglow feature
The orientation light switches on for an adjustable period of time once
movement is no longer detected and the preset time setting
has elapsed.
Night-light feature
If no movement is detected, the orientation light switches on at the
preset orientation light value when the ambient light level falls below
the preset light value. It remains on until a movement is detected, until
the preset light value is exceeded or until the light is switched on using
the button for the relevant light channel.
16
8 • SETTINGS AND FUNCTIONS VIA MOBIL-PDi/plus
REMOTE CONTROL (FIG. 6)
NoTE: To get the best possible reception, point the remote control at the
detector during programming. Please note that if the sun shines directly
onto the sensor, the standard detection range of approximately 8 m may
be reduced by the sun's infrared rays.
Please take note of the modified remote control (fig. 6.2). All functions
can also be carried out using the previous version (fig. 6.1).
Temporary functions
The functions are carried out as soon as the button has been pressed,
but they are not stored.
Button Customised setting
Selecting the channel
Selects the appropriate channels.
Switch oN/oFF manually
Switches oN/oFF the lighting of the previously
selected channel C1 + C2.
Changing the DIM value
Modifes the DIM light value of the previously selected
channel C1 – C2.
1. Select the channel you want to dim (C1).
2. Start the dimming process by pressing the DIM button.
3. Freeze the DIM value by pressing the EYE button.