Care Instructions; Storage Instructions; Material Composition - medi protect.Walker boot Instrucciones De Uso

protect.Air Walker boot
To pump up the inner shoe, please close
the valve and press the pump as many
times until the shoe contains required
amount of air. To remove the air, just open
the valve.
Removing the boot
If the patient is allowed to remove the
boot during their recovery, or when the
boot is removed during a progress
check-up, the straps should be released
and the hook that closes the bootie
should be opened to allow the patient to
step out of the boot with the bootie still
locked in position in the protect.Walker
boot shell. This will enable the patient to
easily reapply the bootie and boot with
the proper leg alignment.

Care instructions

Hook and loop fasteners should be
closed for
washing. Soap residues, lotions and
ointments can cause skin irritation and
material wear.
• Wash the paddings by hand, preferably
using medi clean washing agent.
• Do not bleach.
• Leave to dry naturally.
• Do not iron.
• Do not dry clean.
    

Storage instructions

Keep the brace in a cool, dry place and
do not expose to direct sunlight.

Material composition

Polyester, Nylon, PU-Foam, Fibreglass,
Polyamide, Aluminium
Liability
The manufacturer's liability will become
void if the product is not used as
intended. Please also refer to the
corresponding safety information and
instructions in this manual.
Disposal
The product can be disposed of in the
domestic waste.
English