cod. 99008
10. If the machine is hot, the throttle level can be adjusted to ON position directly when re-start the
machine.
11.
No person except operator allowed 15 meters radius danger zone. Eye, ear, face, foot, leg
and body protection must be worn by operator.
Persons in zone or risk beyond danger zone should wear eye protection against thrown
objects. Risk diminishes with distance from danger zone.
Note: Do not start the motor in tall grass
When the engine has been switched off, the cutter continues running for several seconds
therefore do not get close to the cutting head of the brush cutter until the cutter has come to
a standstill!
MAINTENANCE AND CARE
Before performing any maintenance or cleaning work, always turn off the engine.
1. Do not spray the unit with water. It may damage the engine.
2. Clean the unit with a cloth, hand brush, etc.
Maintenance schedule
12 hours of use
Air filter
clean
Spark plug
check
Expert inspection is required:
a) If the brush cutter strikes an object.
b) If the motor stops suddenly
c) If the blade (not supplied) is bent, do not align.
d) If the gears are damaged.
Replacing and re-sharpening the cutting blade at the end of the mowing season. Always re-sharpen
the cutting blade or, if required, replace the cutting blade with a new one. Always have the cutting
blade re-sharpened or replaced by a customer service centre (measurement of imbalance).
Unbalanced blades will cause the brushcutter to vibrate violently-risk of accident!
24hours of use
36hours of use
clean
replace
clean
replace
25