Fora Premium V10 BLE Manual Del Propietário página 21

Please follow the suggestions below before obtaining a drop of blood:
Wash and dry your hands before starting.
● Select the puncture site either at fingertips or another body part
(please see section "Alternative Site Testing" (AST) on how to select the
appropriate sites).
● Rub the puncture site for about 20 seconds before penetration.
● Clean the puncture site using cotton moistened with 70% alcohol and
let it air dry.
● Use a clear cap while setting up the lancing device.
NOTE:
• Choose a different spot each time you test. Repeated punctures at the same
spot may cause soreness and calluses.
• Please consult your health care professional before you begin AST.
• It is recommended that you discard the first drop of blood as it might contain
tissue fluid, which may affect the test result.
1
2
● Fingertip testing
Press the tip of the lancing device firmly
against the lower side of your fingertip.
Press the release button to puncture your
finger, a click indicates that the puncture
is complete.
● Blood from sites other than the
fingertip
Replace the lancing device cap with
the clear cap for AST. Pull the cocking
control back until it clicks. When lancing
the forearm, upper arm, or hand, avoid
lancing the areas with obvious veins to
avert excessive bleeding.
21