Touch Control Panel - Thermador Masterpiece HMWB30WS Manual Del Usuario

Ocultar thumbs Ver también para Masterpiece HMWB30WS:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Touch Control Panel

NOTE: Not all features referred to in this manual applies to
all models.
FILTER
DELAY
1
2
(1)
FILTER
Clean Filter Reminder
After 40 hours of operation, the FILTER button will illuminate indicating that the filters need to be
cleaned. When this indicator illuminates clean the filters as instructed on page 15. After cleaning,
press and hold the FILTER button for 3 seconds until it beeps to reset the 40-hour period and to
turn the reminder off.
Receive clean filter reminder notification through the Home Connect™ app when activated in Set-
tings section, as well as see filter saturation status.
(2)
DELAY
Delay Shut Off
If the blower is off when the DELAY button is pressed, the blower will turn on to the high speed
setting for 10 minutes. Once time has elapsed, the blower will automatically turn off. If the blower
is on when the DELAY button is pressed, the blower runs for 10 minutes from the time the DELAY
button was pressed at the current speed then turns off. During the 10 minute timed period, the
DELAY button is illuminated. To interrupt a timed period, press one of the fan speed buttons or 0
button to turn off.
Ability to choose a different time period and speed than the default setting is possible through the
Home Connect
(3)
0
OFF
Touch '0' once to turn the blower off and reset the control.
(4)
1 – 4
Fan Speed
Increases or decreases the blower speeds. The chosen blower speed LED will remain illuminated
while in operation.
1 – Low
2 – Medium
3 – Medium/High
4 – High
(5)
AUTO
Automatic Mode
When in AUTO mode, the hood automatically turns the blower on, depending on the amount of
heat the control senses. It automatically adjusts every 5 minutes. If the control does not sense a
high level of heat, it will turn the blower off.
Remotely control and monitor hood fan speeds through Home Connect™ app.
(6)
LIGHTS
LED Light Control
This button controls the LED lighting. The first press turns the lights on. A second press dims the
lights. A third press turns the lights off. 0-100% light slider in Home Connect™ app allows additio-
nal control to obtain the perfect level of light.
(7)
CONNECT
Home Connect
This function allows the user to connect the hood with a mobile device. See "Home Connect™" on
page 11.
Control tone
To turn OFF/ON the control tone, hold the FILTER and LIGHTS button for 3 seconds.
Control tone can also be turned OFF/ON through the settings section of the Home Connect™ app.
English | 10 |
0
1
2
3
app in the settings menu.
TM
TM
3
4
AUTO
4
LIGHTS
CONNECT
5
6
7
Use and Care Guide
Tabla de contenido
loading

Tabla de contenido