How To Wire Your Ceiling Fan - Fanimation The Torto FP7902 Serie Manual Del Propietário

NOTE: If fan or supply wires are different colors than indicated, have this unit installed by a qualified electrician.
WARNING
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring
(Figure 1).
NOTE: If you are not sure if the outlet box is
grounded, contact a licensed electrician for advice, as
it must be grounded for safe operation.
CAUTION: INCORRECT WIRE CONNECTION WOULD
DAMAGE THIS RECEIVER.
1. Connect wires using connectors as shown in Figure 2.
2. After connections have been made, turn leads
upward and carefully push leads into the outlet box,
with the white and green leads to one side of the
box and the black leads towards the other side.
The wires should be spread apart with the grounded
conductor and the equipment-grounding conductor
on one side of the outlet box and the ungrounded
conductor on the other side of the outlet box
(Figure 3).
3. Once the connection has been made, slide the receiver
into the hanger bracket, taking care not to pinch the wires.
The canopy comes up to cover the receiver and hanger
bracket. (Figure 4)

How to Wire Your Ceiling Fan

BLACK
(AC IN L)
BLUE
(FOR LIGHT)
WHITE
(TO MOTOR N)
LISTED
OUTLET BOX
BLACK-ANT
9
MAIN FUSE BOX
Figure 1
WHITE
(AC IN N)
ANTENNA
BLACK
BLACK
(TO MOTOR L)
Figure 2
WHITE
BLACK
BLUE
GREEN - Ground Wire
From Hanger Ball
GREEN - Ground Wire From
Hanger Bracket
Figure 3
Figure 4