Cleaning And Care - Orbegozo MIG 2025 Manual De Instrucciones

MIG 2025
QUICK START/QUICK START
This feature allows you to START/QUICK START the oven quickly. Press the START/QUICK START button a
number of times to set the cooking time, the oven START/QUICK STARTs work at full power immediatedly.
Press Time
START/QUICK
START button
Once 00:30
Twice 1:00
Thrice 1:30
... ...
PRESET
Preset function allows the oven to start at a preset time. Suppose it is 09:00 and you want the oven to start
cooking at 11:30.
1. Press STOP/CANCEL button.
2. Set a cooking program.
3. Press the PRESET button.
4. Rotate the TIME/WEIGHT dial to enter hour digit 11.
5. Press the PRESET button.
6. Rotate de TIME/WEIGHT button dial to enter minute digit 30.
7. Press PRESET to confirm.
Note:
- After the function has been set, you can check the preset time by pressing the PRESET button.
- When it reaches the preset time, beeps can be heard to signal the preset cooking program begins.
- To cancel the feature, touch PRESET and then press STOP/CANCEL.
- Weight Defrost and Quick Start can not be preset.
CHILD LOCK
Use to prevent unsupervised operation of the oven by little children. The child lock indicator will show up on
display screen, and the oven can not be operated while the Child Lock is set.
To set the Child Lock: In standby mode, press and hold the STOP/CANCEL button for 3 seconds, a beep sounds
and lock indicator lights.
To cancel the Child Lock: Press and hold the STOP/CANCEL button for 3 seconds until lock indicator on
display goes off.

CLEANING AND CARE

1. Turn off the oven and remove the power plug from the wall socket before cleaning.
2. Keep the inside of the oven clean. When food splatters or spilled liquids adhere to oven walls, wipe with
a damp cloth. Mild detergent may be used if the oven gets very dirty. Avoid the use of spray and other harsh
cleaners as they may stain, streak or dull the door surface.
3. The outside surfaces should be cleaned with a damp cloth. To prevent damage to the operating parts
inside the oven, water should not be allowed to seep into the ventilation openings.
4. Wipe the door and window on both sides, the door seals and adjacent parts frequently with a damp
cloth to remove any spills or spatters. Do not use abrasive cleaner.
30