Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MODEL: PFN1564
WARNING:
!
The warnings and precautions discussed
above cannot cover all possible
conditions and situations that may occur.
It must be understood by the user that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the user.
UNPACKING
This tool has been shipped completely
●
assembled.
●
Carefully remove the tool and any
accessories from the box.
Inspect the tool carefully to make sure no
●
breakage or damage occurred during
shipping.
●
Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the tool.
●
If any parts are damaged or missing, please
call 1-888-669-5672.
WARNING:
!
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
possible serious personal injury.
WARNING:
!
Do not attempt to modify this tool or
create accessories not recommended for
use with this tool. Any such alteration or
modification is misuse and could result
in hazardous condition leading to
possible serious personal injury.
05
.
HTTP://WWW FREEMANTOOLS COM
FEATURES
SPECIFICATIONS
REQUIRES:
9.39 SCFM with 100
fasteners per minute @ 90 psi
AIR INLET:
1/4 inch NPT
MAGAZINE CAPACITY:
100 fasteners, 15 gauge
WEIGHT:
4.75 lbs
MAXIMUM PRESSURE:
110 psi
–
PRESSURE RANGE:
70 psi 110 psi
PIN SIZE RANGE: 1-1/4" to 2-1/2"
1-1 /4"
32mm
1-1 /2"
38mm
45mm
1-3 /4"
2"
50mm
57mm
2-1 /4"
2-1/2"
64mm
Compatible with all brands of 15 gauge 34°
2-1/2" angle finish nails.
FEATURES
360 ADJUSTABLE EXHAUST
Allows user to direct air away from face.
OIL-FREE DESIGN
For less maintenance.
ONE PIECE DRIVER BLADE
For increased durability.
ANODIZED ALUMINUM CYLINDER AND
MAGAZINE
For long lasting durability.
COMFORT-GRIP HANDLE
For increased comfort and control.
ERGONOMICALLY ENGINEERED BODY
Rugged and Comfortable resulting in a light-
weight tool great for extended use.
AIR FILTER
Keeps interior components debris free,
extending tool life.
DUAL-MODE TRIGGER
Easily allows for Single or Sequential Firing.
ADJUSTABLE DEPTH
Depth is easily adjustable for various
applications.
QUICK-JAM RELEASE
Allows for easy access clearing in the event of
a jam.
NON-MARRING SAFETY CONTACT
Eliminates damage to working surfaces.
.
1-888-669-5672
MODEL: PFN1564
OPERATION
USING BELT HOOK
The tool is packed with a separate hook system.
Assemble the hook on the tool before using the
hook. The hook should be positioned on right side.
1.
Loosen and remove the hook screw and nut(A).
Save the screw and nut for future use.
2.
Position the hook on right position. Using the
longer screw packed with hook, fasten hook to
tool.
Hook nut(A)
ADJUSTING THE EXHAUST
The adjustable exhaust on the cap of the tool allows
users to direct the exhaust according to operator
preference. To adjust the direction, turn the exhaust
cap in the desired direction.
LOADING FASTENERS
⒈
Connect the tool to the air source.
⒉
Pull pusher(B) back until the fasteners follower
falls behind the fasteners. Insert strip of
fasteners into rear of magazine(C). Be sure the
fasteners are pointed downward .
⒊
Pull pusher to let it go back to move the
fasteners up to the driving mechanism. The
pusher will stop when it rests against the end of
the fastener.
.
HTTP://WWW FREEMANTOOLS COM
Pusher(B)
Rear of magazine(C)
WARNING:
!
The tool may fire when it first connected
to the air source. Always connect the tool
to the air source before loading fasteners
to prevent injury from unintended cycling.
Always make sure the tool's magazine is
empty at the beginning of each work
session, before connecting to an air
source.
WARNING:
!
Use only those fasteners recommended
for use with this tool. Fasteners not
identified for use with this tool by the tool
manufacturer are able to result in a risk of
injury to persons or tool damage when
used in this tool.
WARNING:
!
Keep the tool pointed away from yourself
and others when loading fasteners.
Failure to do so could result in possible
serious personal injury.
WARNING:
!
Never load fasteners with the workpiece
contact or trigger activated. Doing so
could result in possible serious personal
injury.
UNLOADING FASTENERS
Unloading is the reverse of loading, except always
disconnect the air source before unloading.
.
1-888-669-5672
06
Tabla de contenido
