Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TOASTING BREAD
1.
Sit the toaster upright on a firm, level, heat-resistant surface.
2.
Put the plug into the power socket.
3.
Turn the browning control to the required setting (1 = light, 6 = dark).
4.
Put bread into the toasting slots (maximum thickness 25mm).
5.
Press the lever down fully. It won't lock down unless the toaster is connected to the electricity supply.
6.
The toasting time gauge will show the toasting time and start to count down.
When it reaches 0, the toast will pop up.
7.
To stop toasting, press the 5 button.
8.
•
You may raise the lever during toasting, to check progress, then lower it again.
FROZEN BREAD
1.
Leave the browning control at your favoured setting, insert the frozen bread, lower the lever, then
press the f button.
2.
The f light will come on, and the toasting time will be altered automatically to give the same degree
of browning you get with unfrozen bread.
3.
The toasting time gauge will show the toasting time and start to count down.
When it reaches 0, the toast will pop up.
4.
REHEATING TOAST
1.
Leave the browning control at your favoured setting, insert the bread, lower the lever, then press the
m button.
2.
The m light will come on, and the toast will be given a short burst of heat.
3.
The toasting time gauge will move to the 30 second mark and start to count down.
4.
When it reaches 0, the toast will pop up.
•
Only reheat plain, "unbuttered" toast.
TOASTING TIME GAUGE
The gauge shows the time it will take to make the toast at the selected browning control setting.
If you cancel toasting by pressing the 5 button, the gauge will stay at the time it was showing when
•
you pressed the button. If you restart toasting by lowering the lever, the gauge will move to the 3
mark then readjust to show the correct toasting time.
If you change the position of the browning control during toasting, the gauge will move to the 3
•
mark then readjust to show the correct toasting time.
•
It will also adjust itself automatically when you use the frozen bread f or reheat buttons m.
BUN WARMER
Don't use the bun warmer to warm frozen, buttered, coated, iced, or filled buns.
1.
Sit the bun warmer on top of the toaster, with the feet inside the slots.
2.
Sit the buns on top of the bun warmer.
3.
Set the browning level to 1, then lower the lever.
4.
When the lever pops up, remove the warmed buns.
5.
Don't touch the bun warmer wires – they'll be hot.
6.
Remove the bun warmer before using the toaster normally.
4
Tabla de contenido
