Tabla de contenido
Solución de problemas
Manuales relacionados para Westinghouse Anderson
Resumen de contenidos para Westinghouse Anderson
- Página 1 ETL-ES-Anderson-R-WH14 Owner's Manual Manual del usuariO Anderson Please write model number here for future reference: / Por favor, incluya el número del modelo aquí para futura referencia: net weight: 17.82 lBs Peso neto: 8.10 KGs...
-
Página 2: Safety Tips
ETL-ES-Anderson-R-WH14 SAfETy TipS OBSERVE THE fOLLOWiNG: READ AND SAVE THESE iNSTRUCTiONS WARNiNG: TO REDUCE THE RiSK Of fiRE, ELECTRiC SHOCK, OR pERSONAL iNJURy, MOUNT TO OUTLET BOX MARKED 'ACCEpTABLE fOR fAN SUppORT Of 15.9 KG (35 LBS) OR LESS' AND USE MOUNTiNG SCREWS pROViDED WiTH THE OUTLET BOX AND/OR SUppORT DiRECTLy fROM BUiLDiNG STRUCTURE. -
Página 3: Consejos De Seguridad
ETL-ES-Anderson-R-WH14 CONSEJOS DE SEGURiDAD HAGA LO SiGUiENTE: LEA y GUARDE ESTAS iNSTRUCCiONES ADVERTENCiA: pARA REDUCiR EL RiESGO DE iNCENDiO, DESCARGA ELÉCTRiCA O HERiDAS GRAVES pERSONALES, MONTE EN UNA CAJA DE EMBUTiR ROTULADA “ADECUADA pARA VENTiLADORES DE 15,9 KG (35 LB) O MENOS” UTiLiZANDO LOS TORNiLLOS DE MONTAJE iNCLUiDOS CON LA CAJA DE EMBUTiR y/O MONTE DiRECTAMENTE EN LA ESTRUCTURA DEL EDifiCiO LA MAyORÍA DE LAS CAJAS DE EMBUTiR UTiLiZADAS .NORMALMENTE CON ARTEfACTOS DE iLUMiNACiÓN NO SON ADECUADAS pARA VENTiLADORES y DEBERÍAN SER REEMpLAZADAS. -
Página 4: Features Características
ETL-ES-Anderson-R-WH14 Features CaraCterístiCas DOWNROD SLOPED CEILING INSTALLATION INSTALLATION INSTALACIóN CON INSTALACIóN PARA VARILLA VERTICAL TECHOS INCLINADOS Note: For pitched ceiling installation, please refer to westinghouselighting.com for specially designed canopy kit options. Nota: Para instalación en techo inclinados, visite westinghouselighting.com para obtener información. - Página 5 ETL-ES-Anderson-R-WH14 Features CaraCterístiCas COMBO-BLADE Combo-Blades feature two high quality finishes on one blade. Select the one that best complements your decor, or change the style with just a flip of the blade. NOTE: Combo-Blade finishes vary, depending upon model. ASPAS DE DOBLE CARA Las aspas del rotor de doble cara presentan dos superficies con un acabado de alta calidad.
-
Página 6: Preparing For Installation Antes De La Instalación
ETL-ES-Anderson-R-WH14 PreParinG FOr installatiOn antes de la instalaCión Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securely fastened by at least two points to a structural ceiling member (a loose box will cause the fan to wobble). -
Página 7: Mounting Bracket Installation Instalación Con Soporte De Montaje
ETL-ES-Anderson-R-WH14 MOuntinG BraCKet installatiOn instalaCión COn sOPOrte de MOntaje Loosen but don’t remove the screws at the bottom of canopy; Install mounting bracket (1) to outlet box in ceiling using the screws and remove the mounting bracket from the canopy. - Página 8 ETL-ES-Anderson-R-WH14 MOuntinG OPtiOns OPCiOnes de MOntaje Choose a MOuntinG OPtiOn elija una OPCión de MOntaje nOrMal dOwnrOd OPtiOn If installing downrod supplied with fan, proceed to page 8, step 6. OPCión COn Varilla VertiCal Para teCHO nOrMal Si instala la varilla vertical incluida con el ventilador, proceda a la página 8, paso 6.
- Página 9 ETL-ES-Anderson-R-WH14 nOrMal dOwnrOd OPtiOn OPCión COn Varilla VertiCal Para CielOrrasO nOrMal Insert downrod into downrod coupling. Make sure to align hole in downrod with the hole in down- rod coupling. Install cross pin (1) through coupling and downrod. Insert keeper pin (2) into cross pin until it snaps into place.
- Página 10 ETL-ES-Anderson-R-WH14 eXtended dOwnrOd OPtiOn OPCión COn Varilla VertiCal MÁs larGa Slide downrod ball (1) off of downrod and remove pin (2). Loosen downrod ball (1) from downrod (2) by removing set screw (3). Deslice la bola de la varilla vertical (1) hasta separarla de la varilla vertical y Afloje la bola de la varilla vertical (1) de la varilla vertical (2) quitando quite el pasador (2).
- Página 11 ETL-ES-Anderson-R-WH14 eXtended dOwnrOd OPtiOn OPCión COn Varilla VertiCal MÁs larGa Re-install pin into extended downrod, and slide downrod ball up to the top of the downrod. Re-install set screw to secure ball to downrod. Note: Some extended downrods have a pre-drilled set-screw hole. If a pre-drilled hole is present in the extended downrod, tighten the set screw into the pre-drilled hole in the extended downrod. If no pre-drilled hole exists in the extended downrod, tighten the set screw against the downrod to secure the downrod ball.
- Página 12 ETL-ES-Anderson-R-WH14 MOuntinG MOntaje Carefully lift fan assembly onto mounting bracket. Rotate fan until notch on downrod ball (1) engages the ridge on the mounting bracket (2). This will allow for hands free wiring. With bracket holding fan assembly, make electrical connections using the following Levante con cuidado el conjunto del ventilador hasta el soporte de montaje.
-
Página 13: Wiring Options
ETL-ES-Anderson-R-WH14 wirinG OPtiOns OPCión de CaBleadO Pull CHain wirinG OPtiOn wall COntrOl wirinG OPtiOn Follow diagram above to make wiring connections for fan pull chain control. Follow diagram above to make wiring connections for wall control operation. OPCión de CaBleadO Para COntrOl de Pared OPCión de CaBleadO Para Cadenilla de tirO... - Página 14 ETL-ES-Anderson-R-WH14 seCure tO CeilinG aseGure el VentiladOr al teCHO Align the keyholes on the canopy (3) with the protruding screw heads (2) from the mounting bracket (1). Lift the canopy up and rotate clockwise until the screwheads engage the keyslots fully.
-
Página 15: Blade Installation Instalación De Las Paletas
ETL-ES-Anderson-R-WH14 Blade installatiOn instalaCión de las Paletas If plastic shipping stabilizer tabs are attached to motor, remove and discard. Attach blade brackets to blades using the blade bracket screws (1), and fabric Attach blade assembly to motor using the noise-dampening motor gaskets and washers (2), if provided. - Página 16 ETL-ES-Anderson-R-WH14 liGHt FiXture installatiOn instalaCión del arteFaCtO luMinOsO Find the wire plugs from the light kit and from the motor and slide together. Connect the blue wire from the switch housing, to the black wire from the light kit, and the white wire from the switch housing to the white wire from the light kit.
- Página 17 ETL-ES-Anderson-R-WH14 Install the glass (5) onto the light kit and tighten the washer (4) and nut (3) onto the bottom of glass. Make sure the ceiling fan pull chain is threaded through the side hole in the bottom of the glass. Place decorative cap (2) over the bottom of glass and secure by tightening decorative finial (1).
- Página 18 ETL-ES-Anderson-R-WH14 Assemble decorative fob and extension chains from hardware bag to fan pull chains by inserting end of chain into chain coupling. Confirm chains are held by lightly pulling both chains in coupling. Sujeta las cadenillas largas de tiro con las piezas finales correspondientes, a las cadenillas del ventilador, introduciendo el extremo de la cadenilla larga en la pieza de unión. Asegúrese de...
-
Página 19: Operation And Maintenance
ETL-ES-Anderson-R-WH14 OpERATiON AND MAiNTENANCE Operation Turn on the power and check operation of fan. The pull chain controls the fan speeds as follows: 1 pull - high; 2 pulls - medium; 3 pulls - low; 4 pulls - off. Speed settings for warm or cool weather depend on factors such as room size, ceiling height, number of fans and so on. -
Página 20: Operación Y Mantenimiento
ETL-ES-Anderson-R-WH14 OpERACiÓN y MANTENiMiENTO Operación Encienda el ventilador y verifique su funcionamiento. La cadenilla de tiro controla las velocidades del ventilador de la siguiente manera: 1 jalón – rápida; 2 jalones - mediana; 3 jalones - lenta; 4 jalones - apagado. -
Página 21: Troubleshooting Guide
ETL-ES-Anderson-R-WH14 If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some trOuBlesHOOtinG Guide cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting chart. -
Página 22: Guía Para Solucionar Problemas
ETL-ES-Anderson-R-WH14 Si tiene dificultades para hacer funcionar su nuevo ventilador, podría ser a causa del armado, instalación Guía Para sOluCiOnar PrOBleMas o cableado incorrectos. En algunos casos, estos errores de instalación podrían ser confundidos con defec- tos. Si experiencia algun fallo, consulte esta guía para solucionar problemas. Si no puede solucionar el problema, consulte a un electricista calificado y no intente reparar conexiones eléctricas. -
Página 23: Parts List
ETL-ES-Anderson-R-WH14 Parts list lista de rePuestOs description 1 ..... . Mounting Bracket (1) 2 ..... . Blade Bracket (5) 3 . - Página 24 ETL-ES-Anderson-R-WH14 Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com , WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse Electric Corporation. Used under license by Westinghouse Lighting All rights reserved. Made in China...