Insignia NS-HWG1955E Guia Del Usuario página 9

NS-HWG1955E-C_18-0256_MAN_V2_TRI-LANG.fm Page 9 Wednesday, April 25, 2018 9:12 AM
Step 4 Attaching the top
:
1 Carefully stand the unit on its legs, then insert eight hidden cams (2), as shown, into the large holes in the side
panels (B and C) and the middle panels (D and E).
2 Insert two wooden dowels (11) into the small holes in the top edges of each side panel (B and C), two in the top
edges of each middle panel (D and E), and two in the top edge of the front (H).
3 Align the top (A) with the front/bottom/panel assembly and push the cam screws into the holes with the
hidden cams in the side and middle panels.
4 Tighten each hidden cam with a Phillips screwdriver as tight as possible (about 180°).
5 Using the Allen wrench (8), secure the top to the front/bottom/panel assembly with three 1/4" bolts (5), 1/4" flat
washers (7), and lock washers (6). All of the doors on the front piece need to be open to access the holes for the
three 1/4" bolts. Leave all the doors on the front (H) open to make it easier to attach the cabinet pulls later.
You'll need:
Phillips screwdriver
2 Hidden
cam (8)
55" Wood or Black Finish TV Stand
8 Allen wrench (1) 5 1/4" bolt (3)
www.insigniaproducts.com
6 Lock 7 Flat
11 Wooden
washer (3) washer (3)
dowel (10)
9