Taurus ALPATEC TROPICANO 5C Manual De Instrucciones página 11

professional or industrial use.
- This appliance should be stored out of reach of
children and/or the disabled.
- Keep the appliance in a dry, dust-free place, out
of direct sunlight.
- Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
- Never leave the appliance unattended while in
use.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance on any part of the
body of a person or animal.
- Do not use the appliance with pets or animals.
- Do not use the appliance to dry textiles of any
kind.
- WARNING: Do not sleep while using this
appliance, as there is risk you could be harmed.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched off permanently.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Ensure that the appliance is level with respect
to the floor.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Some parts of the appliance have been lightly
greased. Consequently, the first time the
appliance is used a light smoke may be detec-
ted. After a short time, this smoke will disappear.
- Prepare the appliance according to the function
you wish to use.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Guide the diffuser of the appliance to direct the
flow of air in the desired direction.
- Turn the appliance on, by using the function and
speed selection control.
- The pilot light (C) comes on.
- Select the function you want the appliance to
carry out.
- Select the desired speed.
- Turn the thermostat control to the desired tem-
perature position.
- During use the pilot light (C) will automatically
flash on and off, thus indicating that the heating
elements are operating in order to maintain the
desired temperature.
OSCILLATION FUNCTION:
The oscillation function allows directing the flow
of air leaving the device so that it alternately and
automatically covers a radius of up to 75º (Fig.2).
FAN FUNCTION:
- Select the fan position.
- Check that the thermostat button is set to the
maximum.
HEAT FUNCTION:
- Select the desired heating power.
- Check that the thermostat control is set to the
temperature required
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance, selecting position 0 on the
speed and function selector.
- Unplug the appliance from the mains.
- Clean the appliance
CARRY HANDLE/S:
- The device has a handle on the upper part so
it can be transported easily and comfortably.
(Fig. 1).
ANTI-CAPSIZE SAFETY DEVICE
- The appliance has an anti-capsize safety device
which disconnects the appliance if the working
position is incorrect.
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- When the appliance switches itself on and off
repeatedly, for reasons other than the ther-