Time Cooking; To Set Power Level; Sensor Settings - Thermador MicroDrawer MD24JS Guía De Uso Y Cuidado

Microwave cooking

TIME COOKING

Your MicroDrawer microwave oven can be programmed
®
for 99 minutes 99 seconds (99.99). Always enter the
seconds after the minutes, even if they are both zeros.
• Suppose you want to cook for 5 minutes at 100%.
1
Enter cooking time
5 0 0
OR TOUCH POWER
2
To cook at 100% power (High), touch START (+1 min)
pad.

TO SET POWER LEVEL

There are eleven preset power levels.
Using lower power levels increases the cooking time,
which is recommended for foods such as cheese, milk
and long slow cooking of meats. Consult a microwave
cookbook or recipes for specific recommendations.
• Suppose you want to defrost for 5 minutes at 30%.
1 Enter defrost time
5 0 0
2
Touch POWER LEVEL pad 8 times.
3 Touch START (+1 min) pad.
TOUCH POWER LEVEL APPROXIMATE
PAD NUMBER OF TIMES
FOR DESIRED POWER
POWER LEVEL x 1
POWER LEVEL x 2
POWER LEVEL x 3
POWER LEVEL x 4
POWER LEVEL x 5
POWER LEVEL x 6
POWER LEVEL x 7
POWER LEVEL x 8
POWER LEVEL x 9
POWER LEVEL x 10
POWER LEVEL x 11
English 10
.
5.00 TOUCH START
LEVEL
.
5.00
COMMON WORDS
PERCENTAGE FOR POWER
OF POWER LEVELS
100% High
90%
80%
70% Medium High
60%
50% Medium
40%
30% Med Low /Defrost
20%
10% Low
0%

SENSOR SETTINGS

The sensor is a semi-conductor device that detects the
vapor (moisture and humidity) emitted from the food as it
heats. The sensor adjusts the cooking times and power
levels for various foods and quantities.
USING SENSOR SETTINGS:
1 After the MicroDrawer
®
wait 2 minutes before using any sensor setting.
2 Be sure the exterior of the cooking container and the
interior of the MicroDrawer
Wipe off any moisture with a dry cloth or paper towel.
3 The sensor works with foods at normal storage tempera-
ture. For example, popcorn would be at room tempera-
ture.
4 Any sensor selection can be programmed with More or
Less Time Adjustment. See page 15.
5 More or less food than the quantity listed in the charts
should be cooked following the guidelines in any micro-
wave cookbook.
6 During the first part of sensor use, the food name will
appear on the display. Do not open the drawer or touch
STOP/CLEAR during this part of the cycle. The measure-
ment of vapor will be interrupted. If this occurs, an error
message will appear. To continue cooking, touch the
STOP/CLEAR pad and cook manually.
When the sensor detects the vapor emitted from the
food, the remainder of cooking/reheating time will appear.
The drawer may be opened when the remaining time
appears on the display. At this time, you may stir or
season food, as desired.
7 Except for Popcorn, if the sensor does not detect vapor
properly when cooking other foods,
displayed, and the microwave will turn off.
8 Check food temperature after cooking. If additional time
is needed, continue to cook manually.
9 Each food has a cooking hint. Touch the SETTINGS pad
when the HELP indicator is lighted in the display.
microwave oven is plugged in,
microwave oven are dry.
®
ERROR will be