Vertex Standard VX-6000 Serie Manual De Operación página 13

MONI (Monitor)
Press the assigned
DCS signaling squelch; the "
key for 1/2 seconds to hear background noise (unmute the audio); the
blinks on the display.
PA (Public Address)
Press the assigned
When you enable this function, a tone sounds and "
The public address can be used even while scanning and receiving a call.
RCL (Channel Recall)
During scan, you can press the assigned
called channel.
ST (Selectable Tone)
Press the assigned
selector knob to select a 2-Tone.
SP
Press the assigned
Body" and "Body" speaker. When "Body" is selected, a tone sounds and the "
icon appears on the display. You can use this function while scanning and receiving
a call. However, all audio will be emitted from the PA speaker.
SQL (Squelch Level)
You can manually adjust the squelch level using this function:
1. Press the assigned
the display with the current squelch level.
2. Rotate the CHANNEL selector knob to select the desired level.
3. Press the this key. A tone sounds and the display returns to the normal channel.
COMP (Compander)
Press the
ON or OFF.
This IC contains two variable gain circuits configured for compressing and expand-
ing the dynamic range of the radio's transmitted and received audio signal.
When you enable this function, the signal-to-noise radio can be improved by reduc-
ing the transmitted audio dynamic range.
Encryption (Option)
When the Voice Scrambler feature is enabled, pressing the assigned
"Encryption" toggles the Scrambler on and off.
Page 10
A
DVANCED
button of the "MONI" momentarily to cancel CTCSS and
button of the "PA" to use the transceiver as a PA amplifier.
button of the "Selectable Tone", then rotate the CHANNEL
button of the "SP" to switch "Front panel", "Front panel &
button of the "SQL". A tone sounds and SQL appears on
button assigned to the "COMP" function to turn the "Compander" IC
O
PERATION
" icon appears on the display. Press and hold this
button of the "RCL" to select the last
VX-6000 Operating Manual
" appears on the display.
button of the
icon
"