Channel Scan; Dual Watch - Vertex Standard VX-6000 Serie Manual De Operación

Functions
Public Address (PA)
RCL
Selectable Tone (ST)
SP**
Squlch Level (SQL)
Compander
Encryption*** (OPT)
* for VX-6000L ** requires RMK-4000

Channel Scan

The Scanning feature is used to monitor multiple signals programmed into the trans-
ceiver. While scanning, the transceiver will check each channel for the presence of a
signal, and will stop on a channel if a signal is present.
To activate scanning:
H Press the assigned PF button of the "Scan" momentarily to activate scanning.
H The scanner will search the channels, looking for active ones; it will pause each
time it finds a channel on which someone is speaking.
To stop scanning
H Press the assigned PF button of the "Scan".
H Operation will revert to the channel to which the CHANNEL selector knob is set.
Note: Your dealer may have programmed your radio to stay on one of the following
channels if you press the PTT switch during scanning pause:
Ì Current channel ("Talk Back")
Ì "Priority" channel
Ì "Scan Start" channel

Dual Watch

The Dual Watch feature is similar to the Scan feature, except that only two channels
are monitored:
Ì The current operating channel; and
Ì The "Priority" channel.
To activate Dual Watch:
H Press the assigned PF button of the "Dual Watch".
H The scanner will search the two channels; it will pause each time it finds a channel
on which someone is speaking.
H Press the assigned PF button of the "Dual Watch".
H Operation will revert to the channel to which the CHANNEL selector knob is set.
VX-6000 Operating Manual
A
DVANCED
Programmable Function Button (PF button)
<1.5 sec >1.5 sec <1.5 sec >1.5 sec <1.5 sec >1.5 sec <1.5 sec >1.5 sec <1.5 sec >1.5 sec <1.5 sec >1.5 sec <1.5 sec >1.5 sec
*** requires Encryption Unit
O
PERATION
Ì "Last Busy" channel
Ì "Home" channel
Page 7