Orbegozo HU 2016 Manual De Instrucciones página 9

Idiomas disponibles

Idiomas disponibles

HU 2016
BEFORE START
What exactly is Relative Humidity?
Relative humidity is the percentage of the actual water vapor contains to the saturated water vapor contains
under the same definite temperature and space. We normally mark it with %RH. Atmospheric air always
contains water vapor, the percentage of which depends on the meteorological conditions. The higher the
temperature is the more the air keeps water vapor. Therefore, we use the concept of "relative humidity".
When the cold air is heated up to the comfort temperature in winter, the relative percentage of the water
vapor falls, which means, the relative humidity drops. In order to keep a comfortable and health environment
at home, we need some artificial addition of water or water vapor to room air – that's air humidification.
Virtues of Orbegozo humidifiers
• To increase and to regulate relative humidity of the room air.
• To eliminate electrostatic charges.
• To keep your appearance fit and protect your skin.
• To adjust room temperature.
DESCRIPTION OF THE PARTS
1. Nozzle
2. Water Tank
3. Water tank cap
4. Unit base
5. Indicator light
6. ON/OFF and mist adjust knob
7. Water level float
USER INSTRUCTIONS
1. Place the base of unit on a smooth level surface.
2. Remove the water tank and fill using the water filling hatch from underneath the tank.
3. Pour plain cold tap water into the tank.
4. Always use distilled water and never add anything to the water (e.g. salt, oils, perfumes, etc ...)
5. Ensure that you tighten the cap on the filling hatch securely.
6. Place the tank onto the base.
7. Plug the appliance into the power outlet. The power indicator light should be illuminated in green.
8. The mist intensity can be adjusted by turning the Mist Intensity Control knob until the desired amount of
mist is emitted from the nozzle.
9. Ensure that the mist output nozzle is directed away from walls and furniture.
10. When the humidifier runs out of water, the appliance will automatically switch off the steam production
mechanism and indicator light will light in red.
11. The steam production time and emission quantity may vary depending on the water hardness.
OTHER FEATURES
In cold weather, windows, and even some walls may fog or develop frost from excessive indoor humidity. If
this occurs, reduce the mist intensity setting to avoid damage from condensed water dripping on
windowsills.
Too much humidity in the room may allow moisture to accumulate on surfaces where bacteria and fungi can
grow. Collected moisture may also harm furniture, and walls, especially wallpaper.
To eliminate too much humidity, especially in a small room, leave the room door open, add adjust the mist
intensity control setting.
9
loading