Fermax DUOX PLUS Skyline Manual De Instalador página 31

DUOX Amplifier Call:
• You can use the buttons with keypads to make direct calls to
specific apartments (professionals).
• The house terminal´s address is encoded with 6 digits (calling
code). The default value is 000000, (not programmed).
• Panels with an address "0" in each block allow for communication
with telephones when picked-up or with the monitors doing
an auto-start with it and the communication lines are free. If
you do not want this feature do not assign this address to
any panels. The monitors also have the option of an auto-
start with panel 1 in your block and panel 0 of the General
Entrance.
• A call is made to the home:
- Button Panels: pressing the corresponding button.
- Panels with keypad: Entering the residence number + bell.
You do not need to enter the 6 digits. If a shorter code is
entered, it is filled in with «0» to the left. The letter «A» can be
used to delete the sequence entered.
• 2 communication channels per block.
Pag 31