PROGRAMMING YOUR
ESPRESSO DEFINED
ESPRESSO MACHINE
1. Select MENU button to program your
preferred settings:
A. ESPRESSO VOLUME: Select to adjust
your espresso volume from 18–45ml.
Default: 40ml
NOTE: Larger coffee volume may alter your
espresso's taste. We recommend using a
bolder capsule to compensate for the
additional water.
B. DOUBLE ESPRESSO VOLUME: Select to
adjust your espresso volume from 70–100ml.
Default: 90ml
NOTE: Larger coffee volume may alter your
espresso's taste. We recommend using a
lungo or bolder capsule to compensate for
the additional water.
C. BREW TEMPERATURE: Raise or lower the
brew temperature from 195˚F – 205˚F in
1-degree increments. Default: 200˚F
D. STANDBY TIME: Select the amount of time
your unit will remain on before going into
standby mode, from 15 minutes to 4 hours.
Standby options: 15 min., 30 min., 1 hr., 1.5 hr.,
2 hr., 2.5 hr., 3 hr., 4 hr, 5 hr. Default: 30 min.
E. FACTORY SETTINGS: Select OK to restore
unit to default settings.
Default Settings:
Espresso: 40ml
Double Espresso: 90ml
Brew Temperature: 200˚F
Standby Time: 30 minutes
F. SERIAL NUMBER: Displays serial number
of your machine.
STANDBY/ENERGY-
SAVING MODE
Following the set Standby/Energy-Saving Mode
time, if there is an additional 30 minutes of
nonuse, the espresso machine will turn off.
Open and close the brew head, or switch unit
off and on again to start preheat mode.
CLEANING AND
MAINTENANCE
™
Cleaning Used-Capsule Container
Container holds approximately
12 capsules and some residual
liquid after brewing. Dispose of
used capsules, replace bin and
continue to use as desired. Be
sure to empty the container of
any used capsules when
prompted. Wash the container
with warm, soapy water.
Cleaning External Parts
We recommend regular cleaning of the
espresso maker's external components.
Cleaning the Housing
Never immerse the machine in water or other
liquids. The housing may be cleaned with a
soapy, damp, nonabrasive cloth.
Cleaning the Drip Tray
To remove the drip tray, simply lift it up off the
unit, keeping it level at all times in order to
prevent spills. Clean the drip tray with a soapy,
damp, nonabrasive cloth. Do not clean drip tray
with cleansers, steel wool pads or other
abrasive materials.
Cleaning the Water Reservoir
Wash water reservoir with warm, soapy water.
It is normal over time for discoloration, spotting
or staining to appear in the water reservoir. This
will vary depending on the mineral content of
the bottled or filtered water used, but will not
affect the operation of the machine. However,
be sure to clean the water reservoir regularly to
minimize buildup.
Descale
Mineral content in water varies from place to
place. Depending on the mineral content of
the water in your area, calcium deposits or
scale may build up in your machine.
Though scale is nontoxic, it can hinder
performance. Descaling will help maintain
the heating element and other parts that
come into contact with water. For optimal
performance, descale your machine once a
month. It is possible with heavy use and/or hard
water for calcium to build up faster, making it
necessary to descale more often.
7