Cleaning And Maintenance; Carbon Brushes; Disposal And Recycling - Bavaria BJS 400 Manual De Instrucciones Original

Anleitung_BJS_400_SPK8__ 19.11.14 10:56 Seite 16
GB

8. Cleaning and maintenance

Always pull out the mains power plug before starting
any cleaning work.
8.1 Cleaning
Keep all safety devices, air vents and the motor
n
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
We recommend that you clean the device
n
immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth
n
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep
into the device.

8.2 Carbon brushes

In case of excessive sparking, have the carbon
n
brushes checked only by a qualified electrician,
or ist aftersales service.
Important! The carbon brushes should not be rep
laced by anyone but a qualified electrician,
or the autorized aftersales service.
8.3 Maintenance
There are no parts inside the equipment which
n
require additional maintenance.

9. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
16