Configuration - D-Link DAP-3310 Guía De Instalación Rápida

STEP 3: Connect Grounding Wire
A grounding wire is recommended to
4
protect your device from lightning strikes
and the buildup of static electricity.
A grounding Wire is not included in the package.
4
It is suggested that you use 16 to 18 AWG
grounding wire.
STEP 4: Connect the AP to Your Network
PoE Injector
P+DATA OUT
C
DATA IN
B
Router or Switch
POWER IN
A. Connect the Ethernet cable (connected
to the AP in STEP 1) from the AP to the
"P+DATA OUT" port on the PoE Injector.
B. Connect an Ethernet cable from a router/
switch or PC to the "DATA IN" port on the
PoE Injector.
C. Attach the power adapter to the
connector labeled "POWER IN" on
the PoE Injector, and attach it into an
electrical outlet.
4  D-Link DAP-3310/DAP-3410 Quick Install Guide
AP
A
LAN (PoE)
Computer

Configuration

If you are configuring the AP locally, connect
a PC to the PoE Injector "DATA IN" port using
an Ethernet cable.
A. Assign a static IP address to your PC
which is in the same network segment
with the device. As the default IP address
of this unit is 192.168.0.50, you may
choose any address from 192.168.0.1 to
192.168.0.254, except 192.168.0.50.
B. Open a web browser and go to
http://192.168.0.50. Enter admin as your
username and leave the password blank to
log into the web UI. Now you can configure
the AP via web UI.