Battery System Standard Description; Measuring Range; Warnings - TOPDON BT300P Manual Del Usuario

Battery System
Standard Description
The battery tester analyzer will test each battery according to
the selected system and rating.
Cold Cranking Amps, specified by SAE & BCI, most
CCA
frequently used value for starting battery at 0°F(-18°C)
BCI Battery Council International standard
CA Cranking Amps standard,effective starting current value at 0°C
Marine Cranking Amps standard,effective starting
MCA
current value at 0°C
Japan Industrial Standard, displayed on the battery as
JIS
combination of the numbers and letters, e.g. 55D23,80D26
DIN German Auto Industry Committee Standard
IEC International Electrotechnical Commission Standard
EN European Automobile Industry Association Standard
SAE Society of Automotive Engineers Standard
GB China National Standard
15

Measuring Range

The Battery Tester can perform test on batteries rated within
100-2000CCA/30Ah-220Ah.
Measure Measure
Standard Range
CCA 100-2000
BCI 100-2000
CA 100-2000
MCA 100-2000
IEC 100-1400

Warnings

• DO NOT place the tester near the engine or exhaust pipe to
avoid damage by high temperatures, when the car engine
is running.
• DO NOT smoke, cause sparks, or strike matches near the
battery when testing.
• DO NOT remove battery clamps while testing.
• DO NOT put the tester into a highly humid, dusty environment.
• DO NOT disassemble the tester, or may cause damage.
Measure Measure
Standard Range
JIS 26A17-245H52
DIN 100-1400
EN 100-2000
SAE 100-2000
GB 30-220Ah
16