Mounting; Set Up And Align - Goobay 39510 Instrucciones De Uso

User Manual
3. Compare the technical data of the product and the mains supply.
These must be identical

4.2 Mounting

EN
CAUTION! Risk of injury by stumbling and falling
• Place, install and transport product, product parts and accessories in a safe way.
CAUTION! Injury by cutting
• Do not touch the edges of the rotor.
The rotor has sharp edges.
Fig.1
1. Place the protective grille with motor block and 4-position switch (3) on a flat and firm surface with
the handle facing upwards.
2. Push the rotor (6) with the spacer towards the motor onto the axle. The rotor must not rest directly
on the motor. There must be a visible gap between the spacer and the motor. See fig. 1 a).
3. Screw the rotor in place with the screw located on the side of the spacer. See fig.1 b).
Fig.2
4. Place the 2nd protective grid half (4) on the protective grid with the motor block and the rotor.
The holes of both halves must be on top of each other. See fig. 2 a).
5. First insert all the Phillips screws (5) through the holes provided in both halves of the grille.
6. Then tighten each screw clockwise in diagonal order, Fig. 2 b). Otherwise the grille may warp.
Fig.3
13
7. Put the two halves of the beam (1) together as shown in fig. 3 a).
8. Screw it tight with the Phillips head screw with lens head (2). See fig. 3 b).
Fig.4
9. Slide a spacer (8) onto each of the screw suspensions on the right and left of the fan's protective
grille, Fig. 4 a).
10. Slide the fan with the screw suspensions and the spacers into the support, fig. 4 b) and 4c).
11. Fix the basket with the triangle hand nuts, Fig. 4 d.
The triangular screws are counter-rotating! One triangular hand nut is tightened anti-clockwise
and the other clockwise.
Fig.5
10 Protective contact plug 11 Handle

4.3 Set up and align

WARNING! Danger to life and injury due to improper environmental conditions
• Do not place the product near an open window.
Rain splashing on the fan can cause electric shock.
• Do not operate the fan in the area of explosive and/or flammable gases.
• Do not place or operate the product near open flames or near cooking or heat generating pro-
ducts such as radiators or stoves.
• Make sure that the fan is not near curtains or objects that can be drawn into the fan.
1. Only hold the fan by the handle (11, Fig. 5) and place it on a dust-free, stable and horizontal sur-
face.
2. Turn the front of the fan in the direction you want to ventilate.
EN
12 4-step switch
14