Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Press the (VIII) button on the remote control to activate the function.
•
The function activation is indicated by the indicator light (b) on the display (1).
•
To deactivate the function, press the (VIII) button on the remote control.
•
Timer (set using the control panel (1) and the remote control (7))
•
Turn on the unit, select the operating mode and set the temperature.
•
Press the (VI) button - the time digits (k) will start flashing on the display (I).
Press the (VI) button again until the time is set to between 1 and 24 hours.
•
After selecting the time, wait until the digits (K) stop flashing - the display will now show
•
the time.
The function activation is indicated by an indicator light (d) on the display.
•
To see how much time is left until the heater switches off, press the (VI) button once
•
- the time left until the heater switches off will be displayed in the (k) field for a few
seconds.
When the TIMER function is active, temperature settings and the operating mode can
•
be changed.
To deactivate the function press the (VI) button and set "00:00".
•
Delayed start (setting available only via control panel (1))
•
The appliance must be connected to the mains and the (5) switch set to "I".
Press and hold the "VI" button on the control panel (1) - the time digits (k) will start
•
blinking on the display (I).
•
Press the "VI" button again, until a time in the range between 1 and 24 hours has
been set.
After selecting the time, wait until the digits (k) stop blinking.
•
•
The function activation is indicated by the indicator light (d) on the display and by the
countdown.
•
Once switched on, the heater will operate according to the pre-programmed settings.
To deactivate the function, press the "II" button on the control panel (1) or on the remote
•
control (7) twice.
Key lock (can only be set using the control panel (1))
•
To lock the keys, press the (+) and (-) buttons simultaneously.
The function activation is indicated by the indicator light (b) on the display (1).
•
All operations described above are available with the weekly heating schedule
disabled.
WEEKLY HEATING SCHEDULE
•
The user can set an operating schedule for each day of the week in the unit.
•
The user can set 6 work periods for each day - a total of 42 work periods can be set for 7 days.
•
Before programming an operation schedule, the time and day of the week should be set
(see Setting the time and day of the week).
•
The schedule will remain active until it is switched off or the device is disconnected from
the mains.
18
Tabla de contenido
